Cupolas
offered in Cedar or Poplar Wood Finishes
Made in USA
Screening behind louvers is provided.
We
have designed our cupolas to be larger and priced less that the
competition. We represent
"TRUE" retail price less 25%.
Some sites mark up retail prices or sell cupolas piece by piece.
We provide email receipts of your orders.
We have a code of conduct on our home page.
Our
designs offer arches and fluted corners found only on
more expensive cupolas!
You will
receive installation instructions
To
view or print cupola installation CLICK
HERE
All
WEATHERVANE SHOPPE CUPOLAS ARE DISCOUNTED 25%
Cupolas
are adapted for weathervane or finial so there
is no visible mounting on you cupola roof top.
Should you
not find the right size or design for your purpose, we do offer
custom built cupolas. Click
here or
Call us to discuss at 800-968-6006
The Weathervane Shoppe Cupolas are
manufactured with quality materials and strict attention to detail.
When you combine good materials and professional workmanship you get
a cupola that is a cut above the competition.
Here is a breakdown of our parts
and the materials used.
Standard Roof:
- We start with oriented strand
board that is made with water resistant adhesives.
- We add a Cedar or poplar arch.
- We put a support block with a
1/4" hole in the top and a brace across the bottom so a
weathervane can be installed.
- We clad the roof with copper and
seal all joints with 50 year silicone.
Pagoda Style Roof:
- We start with either a Cedar
or poplar roof edge.
- We put a support block with a
1/4" hole in the top of the roof.
- We add rafters which are
attached to the roof edge and top support block.
- We put a support brace across
the bottom for weathervane installation.
- We form 1/4" luan over the
rafters.
- We install either a Cedar or
poplar arch.
- We clad the roof with copper and
seal all joints with 50 year silicone.
Tower:
- The tower contains the louvered
sections and may be made from Cedar or polar.
- We install the louver sections
between corner posts and then attach a sill with a rain groove
for water run-off.
- Insect screen is provided for
the inside of the louver sections.
Base:
- The base is made from clear
grade of exterior plywood.
- The base can be made any height
to accommodate the pitch of the roof the cupola will be mounted
on.
Hardware:
- We supply brass screws to attach
the roof, tower and base together.
- We have a special locator block
to attach the tower to the base.
- Complete assembly and painting
instructions are included.
