EZ Vanes Weathervanes
Our EZ Vane steel weathervanes are made of 14 gauge US steel and come with your choice of mounting hardware and an industry leading one year warranty on the finish and a lifetime warranty on all workmanship.
Our design tops are made from US steel and laser cut in one piece, minimizing welding and making them very easy to interchange. An EZ Vane steel weathervane will be a unique addition to your beautiful home.
The standard color for all EZ Vane steel weathervanes is a baked on powder coating that is a copper tone finish with a hammered textured appearance to it. This weather resistant and durable finish has a nice reflective quality to it that causes the vane to glisten somewhat in the direct sunlight...it's actually quite beautiful to observe as the vane points the direction of the wind.
Birds and Butterflies | Collegiate | Dogs and Cats | Horses | Military | Recreation | Rodeo | Seasonal | Vehicles | Whimsical | Wildlife
EACH EZ VANE STEEL WEATHERVANE INCLUDES YOUR CHOICE OF MOUNT
3 Sided Mount: This mount mounts to the outside of a gazebo or cupola. It includes a 12" rod. Order the 3 sided mount for 3 or 6 sided peaks. Order the 4 sided mount for 4 or 8 sided peaks. Each leg of the mount measures approximately 5 3/4" long from the center of the upright tube.
4 Sided Mount: The four sided mount is made for mounting to a 4 or 8 sided cupola or gazebo. This mount comes with a 12" rod(not pictured). Each leg of the mount measures approximately 5 3/4" long from the center of the upright tube.
Deck Mount: Mount to a flat board i.e. deck board. It is approx. 3" x 3" and includes the 12" rod(not pictured).
Garden Mount: 60" mount includes stabilizing ground stake. The garden mount ships in two pieces and must be screwed together upon arrival.
Post Mount: The post mount or (side mount) will mount to the side of a fence of vertical board. It is approx. 3"x 3" and includes the 12" rod(not pictured).
Roof Mount: Our roof mount is adjustable, but is made to a 4/12 roof pitch. It includes a 12" rod.
Cupola Mount: Our cupola mount is installed inside the cupola and protrudes from the standard 3/4in. hole in the center of the cupola roof. The cupola mount includes a 30" rod and a 3/4" x 2" adapter sleeve. **($17.50 additional per vane)
ADD A SIGN UNDER YOUR STEEL WEATHER VANE FOR A SPECIAL GREETING FOR FRIENDS AND VISITORS
You can add a sign that spells out a warm greeting or a whimsical message that will surely bring a smile to the face of your friends or visitors. The sign is mounted underneath the directionals and is color coordinated with your choice of either satin black or copper tone vanes. There are two signs available "Welcome" and "Go Away!". The signs add a nice custom touch to any vane selection.
ADD A FUNCTIONAL RAIN GAUGE ASSEMBLY TO YOUR STEEL WEATHERVANE
- The rain gauge vial is custom made in the USA for the EZVane weathervanes.
- The rain gauge bracket is made of heavy 14 gauge steel and finished with our unique durable three step coating process.
- Rubber grommets securely hold the gauge to the weathervane pole while at the same time preventing damage to the glass vial.
- Replacement glass vials are available.
WHY CHOOSE AN EZ VANE STEEL WEATHERVANE?
Why choose an EZ Vane steel weathervane? It's easy...QUALITY! Our three step finishing process is unique and we manufacture all our products in Grand Rapids Michigan right here in the USA.
Step 1: Yellow zinc chromate plating. Better adhesion, durability and rust prevention.
Step 2: Polyester copper vein. Baked on for a hammered finish look.
Step 3: Clear Polyester powder coat. Baked on to protect against UV rays and fading.