Sailing into your landscape, this fixed-wing, one-of-a-kind, amphibious aircraft would make a spectacular addition to any pilot’s home and yard – Made of 14-gauge steel, this weathervane adds a touch of beauty in any home or garden setting. Easily installs in less than 1 minute. Intricate laser cut design with 3 protective coatings baked on to prevent rust or fading for years. Complete set includes laser cut top, windcups that have sealed ball bearings to gently turn in any breeze, an EWNS directional that tells the direction the wind is coming from and your choice of mount. The Float Plane Design is approximately: 21" long x 6" tall. The Ornament Including Windcups and Directionals size: 21L x 9W x 25H in.
EACH EZ VANE STEEL WEATHERVANE INCLUDES YOUR CHOICE OF MOUNT
4 Sided Mount: The four sided mount is made for mounting to a 4 or 8 sided cupola or gazebo. This mount comes with a 12" rod(not pictured). Each leg of the mount measures approximately 5 3/4" long from the center of the upright tube.
Deck Mount: Mount to a flat board i.e. deck board. It is approx. 3" x 3" and includes the 12" rod(not pictured).
Garden Mount: 60" mount includes stabilizing ground stake. The garden mount ships in two pieces and must be screwed together upon arrival.
Post Mount: The post mount or (side mount) will mount to the side of a fence of vertical board. It is approx. 3"x 3" and includes the 12" rod(not pictured).
Roof Mount: Our roof mount is adjustable, but is made to a 4/12 roof pitch. It includes a 12" rod.
Cupola Mount: Our cupola mount is installed inside the cupola and protrudes from the standard 3/4in. hole in the center of the cupola roof. The EZ Vane cupola mount includes a standard rod with a 3/4" x 2" female adapter sleeve. The cupola mount adapter is intended to be threaded into a 3/4" upright bolt that you provide inside the cupola. **($17.50 additional per vane)