Bring an auto icon to your outdoor space with this '67 Chevy Chevelle weathervane. The Chevrolet Chevelle is a mid-sized automobile which was produced by Chevrolet in three generations for the 1964 through 1978 model years. Part of the General Motors(GM) A-Body platform, the Chevelle was one of Chevrolet's most successful nameplates. Body styles include coupes, sedans, convertibles and station wagons. Super Sport versions were produced through the 1973 model year, and Lagunas from 1973 through 1976.Made in the USA. Approximate ornament size: 21in. x 5in.
This is an all steel weathervane, complete with directionals, wind cups mounting pole and your choice of weathervane mount.
Delivery of this custom weathervane is typically 4 weeks.
EACH EZ VANE STEEL WEATHERVANE INCLUDES YOUR CHOICE OF MOUNT
3 Sided Mount: This mount mounts to the outside of a gazebo or cupola. It includes a 12" rod. Order the 3 sided mount for 3 or 6 sided peaks. Order the 4 sided mount for 4 or 8 sided peaks. Each leg of the mount measures approximately 5 3/4" long from the center of the upright tube.
4 Sided Mount: The four sided mount is made for mounting to a 4 or 8 sided cupola or gazebo. This mount comes with a 12" rod(not pictured). Each leg of the mount measures approximately 5 3/4" long from the center of the upright tube.
Deck Mount: Mount to a flat board i.e. deck board. It is approx. 3" x 3" and includes the 12" rod(not pictured).
Garden Mount: 60" mount includes stabilizing ground stake. The garden mount ships in two pieces and must be screwed together upon arrival.
Post Mount: The post mount or (side mount) will mount to the side of a fence of vertical board. It is approx. 3"x 3" and includes the 12" rod(not pictured).
Roof Mount: Our roof mount is adjustable, but is made to a 4/12 roof pitch. It includes a 12" rod.
Cupola Mount: Our cupola mount is installed inside the cupola and protrudes from the standard 3/4in. hole in the center of the cupola roof. The EZ Vane cupola mount includes a standard rod with a 3/4" x 2" female adapter sleeve. The cupola mount adapter is intended to be threaded into a 3/4" upright bolt that you provide inside the cupola. **($17.50 additional per vane)